YOU ARE HERE HOME / PRODUCTS / GSO / RC GSO / 8 inch RC
8" f/8 Ritchey-Chrétien Astrograph (OTA) optical tube. . . . . Rs 60600
Recommend for: observation and imaging on a high level
 

Advantages of a RC telescope with MAC and SCT

  • Aperture 8" / 203mm.......Focal Length 1600mm
  • f/8 is faster than a 8" SC or Mak
  • illuminated field is much bigger
  • you can attach 2" eyepieces and full size SLR/DSLR cameras without vignetting
  • two hyperboloidical mirrors with 96% reflectivity lead to a bright image
  • faster cool-down time and no dew problems because of open tube design without front correcting plate
  • enough back focus for all kinds of accessories like correctors and reducers
  • 2" MONORAIL Focuser with better stability
  • Less dew problems against Schmidt Cassegrain or similar
  • fixed mirrors and 2" Crayford focuser with 1:10 dual speed transmission - no problems with mirror shift
  • A rotatable, machined dual-speed (10:1) Crayford focuser equipped with a sturdy linear-bearing provides precise focus adjustment without slippage or flexure with heavy astrophotography accessories attached
  • Features one dovetail finder scope bases.
  • 8" RC f/8 Astrograph is designed for full illumination of the "35mm format" (24 x 36mm).

8" f/8 RC astrograph telescope is perfect for astrophotography but also for visual observation. The RC has a concave hyperbolical primary mirror and a convex hyperbolical secondary mirror. The resulting image correction throughout the field as well as the sharpness on the optical axis are superior to typical Schmidt-Cassegrains or Newtonians. Both mirrors are ground and polished under pricision computer control to diffraction-limited or better surface accuracy.

 
TELESCOPE SPECIFICATION
Best for viewing Planet and Deep sky
Best for Imaging Deep sky
Astro-imaging capibility Lunar, planetary and long exposure
RC8 8" f/8 Ritchey-Chrétien Telescope
Optical Design Ritchey- Chretien with a hyperbolic primary- and secondary mirror.
Diameter Primary Mirror 203 mm Primary Mirror 96% reflectivity dielectrically coated/minimum 1/12th wave, BaK7 glass
Focal Length 1600 mm
Focal Ratio f/8
Optical type Hyperbolic
Accepts Eyepiece Barrel Ø 50.8mm (2") to 31.7mm(1.25")
Resolving power 0.58 arc sec.
Limiting Stellar magnitude 14.2
Optical quality Diffraction limited
Focuser M-LRN Monorail focuser with micro transmission 1:10 Crayford focuser for extremely smooth focusing. The dual speed 1:10 focusing knob is particularly important for astro imaging. No image shift and up to 5kgs load capacity! The focuser accepts 2" and 1.25" accessories.
Standard Eyepiece(s) Not included
View Finder Scope not includer
Star Diagonal not included
Computer-optimized baffle system The inside of the tube is lined with computer-optimized baffles for optimum suppression of stray light.
Tube materila Aluminum
Lengt of optical tube 22"
diameter of tube 230 mm
Weight, optical tube 18.5 lbs. (8.5 kg)
Other features Vixen style dovetail mounting bar, 360-Degree rotating camera angle adjustment collar
 
The following items are FREE with the telescope listed above.
Sky Astronomy (Software) Level 1 and 2: CD  
Collimination Tool (for Newtonian)
Directional Compass  FREE
Micro Fiber (Anti-Static) Cleaning cloth
Optics Cleaning Fluid
110 Messier Object Locator     A4 size front back colour print
109 Deep Sky CALDWELL Catalogue A4 size front back colour print
Star Dial - Identifying Stars & Constellations
Various Astronomical Post-Card (SET-3)
Desiccant Cap - Refillable desiccant cap to protect fine optics
Astronomical Telescope - user guide
The Moon Map Poster B/W chart unfold to 22"x26"
 

The GSO 8RC astrograph (a telescope designed specifically for photographing comparatively wide areas of the sky) makes the coma-free imaging of true Ritchey-Chrétien imaging optics available to the DSLR and CCD astrophotographer at a price less than that of most CCD cameras. It is not designed for digiscoping through an eyepiece. Featuring premium low thermal expansion quartz mirrors rather than ordinary optical glass, this very economical 8” R-C makes you wonder just what those outrageously expensive R-Cs have that makes them cost so much.

Designed for exceptional imaging, the 8 inch RC provides the wide coma-free photographic field that DSLR and CCD astrophotographers crave, but can’t get from conventional reflectors and Schmidt-Cassegrains. Likewise, as a pure two-mirror system, the 8 RC is totally free from the spurious color that affects the imaging of all but the most costly apochromatic refractors, and it does it with an 8” aperture that dwarfs the light gathering of most apo refractors.

If serious astrophotography is your goal, but the price of most true Ritchey-Chrétien optics has been keeping you from the optical design most modern professional observatories and the Hubble Space Telescope use for their imaging, your wait is over. The 8 inch RC astrograph can bring the world of professional DSLR/CCD deep space imaging to your backyard observatory at a remarkably affordable price.

Features of this Astro-Tech AT8RCS astrograph . . .

  • Optical design: true Ritchey-Chrétien Cassegrain-type two-mirror optics, with hyperbolic primary and secondary mirrors. For more details, click on the “optics” icon above.
  • Optical specifications: 8” aperture, 1625mm focal length, f/8 focal ratio.
  • Hyperboloid primary mirror: Made of low thermal expansion quartz, rather than the ordinary optical glass used by competitors. Ground and polished under precision computer control to diffraction-limited or better surface accuracy. Unlike catadioptric designs (SCTs, Maksutovs, etc.) that move the primary mirror fore and aft in the optical tube to focus (which can lead to image shift as the mirror position changes) the 8RC primary mirror is fixed to eliminate both a catadioptric’s image shift and the primary mirror collimation requirements of a Newtonian reflector.
  • Hyperboloid secondary mirror: Made of low thermal expansion quartz, rather than ordinary optical glass. Ground and polished under precision computer control to diffraction-limited or better surface accuracy. Mounted in a four-vane spider and fully collimatable using simple standard Cassegrain reflector collimating techniques. Unlike complicated R-C designs that use motors to move the secondary mirror fore and aft to focus, the 8RC secondary mirror is fixed and focusing is done externally.
  • 96% reflectivity enhanced aluminum coated optics: Both primary and secondary mirrors are coated with 96% reflectivity enhanced aluminum, overcoated with a layer of quartz for long life.
  • Steel optical tube: While not quite as resistant to temperature-related focus changes as its more expensive carbon fiber brother, the 9” o.d. x 18” long steel tube of the AT8RCS will require few, if any, focus adjustments during most imaging sessions.
  • Multiple internal light baffles: Computer optimized primary and secondary baffling. Ten contrast-enhancing glare-stop baffles in the optical tube; multiple glare-stop microbaffles in the secondary mirror light shield; and five baffles in the primary mirror baffle tube provide truly dark sky backgrounds during imaging.
  • Dual-speed linear Crayford focuser: A new design 2” Crayford focuser is threaded onto the 90mm x 1mm pitch rear cell of the 8RC. The matte black interior of the new longer 50mm travel drawtube has anti-reflection threading for high contrast. The focuser can be rotated to any convenient angle for the sake of photographic composition by simply loosening the collar that secures the focuser to the scope body, rotating the focuser to the desired angle, and tightening the collar to lock the focuser in the new orientation.

The new bearing-less linear focuser has a polished stainless steel drive rail that runs the length of the drawtube, rather than having the stainless steel drive shaft simply press directly on (and wear) the aluminum drawtube as with conventional Crayford focusers.

The drive rail rides in a self-lubricating track that extends most of the length of the focuser body. The drive rail and its attached drawtube are thereby supported over most of their length at all times, rather than by a conventional Crayford focuser’s two sets of small contact area roller bearings. This system distributes the drive force evenly over the entire drawtube, without concentrating it on a few small contact points. The result is less potential drawtube flexure and no wear (much less uneven wear) on the drawtube.
   
The precision-made non-vignetting focuser has dual-speed focusing. There are two coarse focusing knobs. The right knob also has a smaller concentric knob with a 10:1 reduction gear microfine focusing ratio. This provides exceptionally precise image control during critical imaging. All focus knobs are ribbed, so they are easy to operate, even while wearing gloves or mittens in cold weather. Multiple internal baffles in the focuser drawtube assure high contrast.
   
Despite the new more rigid focuser design, the weight of very heavy equipment trains (camera, plus filter wheel, plus temperature-compensated electric focuser, etc.) may cause the 50mm long focuser drawtube to tilt slightly when fully extended, affecting the focus. Three threaded extension rings (two 1” in length and one 2”) are provided to install singly or in combination between the 8RC rear cell and the focuser. These provide a flex-free solid metal extension that changes the distance between the focuser and the rear cell. This lets you accommodate the varying back-focus requirements of DSLR-type camera imaging versus long equipment train CCD imaging, while minimizing the need to extend the focuser drawtube. Additional optional 1” and 2” long threaded extension rings are available to fine-tune the back focus as needed, as well as optional Astro-Tech 2” compression ring extension tubes that fit into the focuser drawtube.
   
The image plane is located 10” behind the rear cell. With the standard dual-speed Crayford focuser installed on the scope, there is 159.71mm of back focus available from the top surface of the 2” accessory holder to the image plane.
 
   
For even more impressive coma-free imaging with the 8RC, consider adding the field flattener. While not specifically designed to work with Ritchey-Chrétien astrographs, images taken with the field flattener by R-C owners have shown that the 2" field flattener works remarkably well with these advanced coma-free reflectors as well as with refractors. This modestly-priced imaging accessory essentially eliminates the residual field curvature inherent in all reflector telescope designs, so that the coma-free star images remain point-like all across the field.

  • Two compression ring accessory holders: The focuser drawtube ends in a 2” accessory holder that uses a non-marring soft brass compression ring to hold 2” imaging accessories in place. The compression ring won’t scratch the barrel of your accessories as an ordinary thumbscrew can. Also supplied is a 1.25” accessory holder that slips into the 2” compression ring holder to let you use 1.25” imaging accessories. Like the 2” accessory holder on the drawtube, the 1.25” adapter also uses a non-marring soft brass compression ring.
  • Two dovetail mounting rails: Two dovetail rails are provided for installing the 8RS on an equatorial mount, as well as for mounting optional accessories (such as a photoguide scope) on top of the 8RC. One is a Losmandy-style “D-plate” dovetail rail that runs the full length of the underside of the optical tube, for installing the 8RC on a Losmandy-style equatorial mount. The second is a Vixen-style dovetail rail that runs the full length of the top of the tube. This can be used for installing a photoguide ring set, piggyback camera adapter, or any other accessory that attaches to a scope by means of Vixen-style dovetail adapters. If the 8RC is rotated 180°, it will bring the Vixen-style rail to the bottom of the tube so it can be used to install the 8RC on a Vixen-style equatorial mount. Competitors provide only one Vixen-style dovetail. Providing two dovetail rails on the Astro-Tech 8RCS does not limit your choice of mounts or accessory mounting options, as can happen with similar scopes provided with only one mounting rail.
  • Finderscope dovetail: a Vixen-style finderscope bracket dovetail base is installed on the upper left side of the optical tube. It can easily be removed if not needed. It will accept Vixen-style finderscope brackets as well as red dot-type finders.
Suggested Accessories with this Telescope
    SOLAR FILTER
  • Baader Solar Filter (off-axis) Germany . . . . Rs. 1560
  • R-G Solar filter (USA) provide more pleasing and natural Yellow-Orange image of the Sun . . . . Rs 1830
    EYEPIECES (Super Premium Plossl for GSO)
  • 40mm Plossl Eyepiece 1.25" . . . . Rs. 2820
  • 32 mm Plossl Eyepiece 1.25" . . . . Rs 2640
  • 25 mm Plossl Eyepiece 1.25" . . . . Rs. 2550
  • 20 mm Plossl Eyepiece 1.25" . . . . Rs. 2460
  • 15 mm Plossl Eyepiece 1.25" . . . . Rs. 2280
  • 12 mm Plossl Eyepiece 1.25" . . . . Rs. 2100
  • 6 mm Plossl Eyepiece 1.25" . . . . Rs. 2100
  • 4 mm Plossl Eyepiece 1.25" . . . . Rs. 2100
  • GSO SuperView 15mm 1.25" Wide Angle Eyepiece . . . . Rs. 3000
  • GSO SuperView 20mm 1.15" Wide Angle Eyepiece . . . . Rs. 3000
  • GSO SuperView 30mm 2 " Wide Angle Eyepiece . . . . Rs. 4800
  • GSO SuperView 42mm 2" Wide Angle Eyepiece . . . . Rs. 4800
  • GSO SuperView 50mm 2" Wide Angle Eyepiece . . . . Rs. 4800
    BARLOW
  • GSO 2x ED-Barlow-Lens (Multicoated) . . . . Rs.4800
  • GSO 2X Achromatic BARLOW LENS- fully multicoated 1.25" . . . . Rs. 1470
  • ED 3X Barlow Lens GSO 1.25" . . . . Rs. 2640
  • 3 Elememt 2.5x Barlow GSO 1.25"  . . . . Rs. 2370
  • 3 Elememt 5x Barlow GSO . . . . Rs. 2820
    CAMERA ATTACHMENTS
  • T-RING Nikon . . . . Rs. 840
  • T-RING Canon . . . . Rs 840
  • T Adapter 1.25" . . . . Rs. 750
  • Universal A-focal / Digital camera adapter . . . . Rs 930
  • Universal A-focal / Par-focal cam-cord adapter . . . . Rs 1200
  • Super ACHROMATIC (MultiCoated /High Colour corrected) 2X BARLOW 1.25" OD, 2 ELEMENT LENS with T-thread for direct camera attachment /with Brass compression ring / GSO. . . . Rs. 3,000
  • 2 inch T-2 Camera Adapter . . . . Rs 1650
  • Eyepiece Projection Camera Adapter . . . . Rs. 2100
  • Universal Cell Phone Adapter . . . . Rs. 1830
  • GSO 1.25" 32mm Camera Projection Lens (CPL) eyepiece ... Rs. 3,900
  • GSO 1.25" 40mm Camera Projection Lens (CPL) eyepiece ... Rs.4,080
  • GSO 2" 30mm Camera Projection Lens (CSV) eyepiece ... Rs.5,700
  • GSO 2" 42mm Camera Projection Lens (CSV) eyepiece ... Rs.5,700

  • CARRY BAG
  • Carry Bag for 8 inch Dobsonian OTA . . . . Rs. 2100
  • GSO....0.5X Focal Reducer 1.25" with 25mm extension tube ....Rs 1560
  • GSO.....0.5x Focal Reducer 2 inch ....Rs 2100
  • Planet View filter each . . . . Rs 660
 
 
Copyright © 2008 - Tejraj & Co. All Rights Reserved.
Website Powered By : Pinnacle Pixel
Home Page Send us an e-mail NOW!! Site Map